RIGHT
LEFT
AUTOMUTE ASSIGNS
REMOTE CONTROL
AUTOMUTE INPUT
AUTOMUTE LINK
NRTL/C
The XL42 can be used within an Automute system. The standard 9-Pin plug can control up to 8 independent mono
channels, each of which can be addressed by the XL42.
To assign an Automute address for each channel, the REMOTE CONTROL AUTOMUTE ASSIGNS should be turned on
for the desired Automute address.
i.e. LEFT ASSIGN 2 would make the left hand channel of the XL42 mute on channel 2 of the Automute system.
Each channel may be assigned to more than one Automute channel simply by switching each of the desired DIP
switches.
The Automute plugs are wired as follows:
The XL42 Automute system is compatible with all MIDAS XL series consoles, hence the XL42 is an ideal expansion
to an XL series console when extra channels are required.
1 2 3 4 5
5 4 3 2 1
6 7 8 9
9 8 7 6
Pin 1 Automute 1
Pin 2 Automute 2
Pin 3 Automute 3
Pin 4 Automute 4
Pin 5 Automute 5
Pin 6 Automute 6
Pin 7 Automute 7
Pin 8 Automute 8
Pin 9 Common
Auto-Mute Operation
Auto-Mute Operation
XL42
Operators Manual -
Page 14
