Midas Touch MTA-3101, Руководство пользователя

Страница: 42 / 50

- 28 -
Using the Device
3.5 Enabling Bluetooth and Pairing with Bluetooth
Device
1. Swipe down the Status bar and tap the BLUETOOTH tile to enable Bluetooth
if it isn't enabled yet.
2. In the Quick Settings panel, tap and hold the BLUETOOTH tile to access the
Bluetooth settings page.
3. If the Bluetooth device you want to pair with is not displayed in the AVAILABLE
DEVICES list, tap SEARCH FOR DEVICES in the upper right corner.
The MTA-3101 proceeds to scan for any Bluetooth device in range. Then it
displays the names of the device(s) found.
If the MTA-3101 stops scanning before the other device becomes discoverable,
tap
SEARCH FOR DEVICES again.
Note : If the device to pair with
isn’t displayed after the scan, check if it is
configured to be discoverable.
4. Tap the device you want to pair with. When the Bluetooth pairing request
dialog box appears, tap Pair . The MTA-3101 will then send a connection
request to the device you want to pair with.
On the device to pair with, a dialog box appears requesting to enter or verify the
pairing code. The passkey entered or shown on the MTA-3101 and the
Bluetooth device must be the same.