©2017 Mid West Products, Inc.
-3-
Form No. M1-1604
Assembly
Remove all Sweeper Parts from Carton.
All “Right” and “Left” directions are in reference to position
behind the Lawn Sweeper.
Tools required for assembly: Two (2) 7/16” – 1/2" Combination Wrench, one (1) Adjustable Wrench,
and one (1) Pliers. Lay out all Parts, have Tools handy, and follow these few Instructions:
Step 1:
Install Adjustment Tube (7) to Chassis. Insert Adjustment Tube through rectangular hole of
Adjustment Bracket. Fasten the Adjustment Tube with Bolt (55) and Nut (11). (Note
– Bolt (55) and
Nut (11) are already slightly tightened on the Chassis.) Pull Spring (33) and Retainer Tube (34) forward
until the Spring is secure in the notched location of the Adjustment Bracket.
Step 2:
Install Hitch Tube Assembly by removing Pilot Nuts (60), which are already slightly tightened
on the Chassis. Install Hitch Tube Assembly on Bolts (61) and Secure with Pilot Nuts (60). (See Image:
Below
– Left)
Step 3:
Take Wind Apron (65) and fasten Velcro to both Side Hamper Tubes (42). Fasten the other
Velcro strap to the rear of the Hamper Pivot Brackets (44). (See Image: Above
– Right)
