Mid-tech ARC 6000, Руководство пользователя

Страница: 37 / 68

4-3
98-05012
R3
ARC-6000
are available to repair the meters. Contact your
MID-TECH dealer for these parts.
Flow Control Valve
T
he flow control valve should be inspected to
periodically to ensure there are no leaks
around the attachment fittings. At the end of
the day, care should be taken to thoroughly flush
the flow control valve with clean water. ALWAYS
VERIFY THAT WATER OR SEDIMENT IS
NOT TRAPPED IN THE FLOW CONTROL
VALVE, PARTICULARLY IN COLD
WEATHER, AS DAMAGE TO THE MECHA-
NISM MAY OCCUR.
Wiring Harness
M
ost failures of electronic systems, like the
MID-TECH Control System, are the result
of broken wires or poor connections.
Taking some time to periodically inspect and clean
the wiring harness and connectors will help prevent
these types of failures.
Inspect the external cabling for abrasion, and
stretched or pinched wires. If such conditions are
found, reroute the cabling and wrap it to protect it
from further damage. If a broken wire is found, it
can be temporarily repaired by stripping the wire
back on each side of the break, twisting it together
and soldering the connection' (Do not use acid core
solder). The bare connection must be well insulated
with heat shrink material or electrical tape.
The connectors at the ends of the cables must be
periodically inspected and cleaned. Use a non-
lubricating spray solvent (such as a tuner cleaner) to
clean the connections. If the contact must be wiped
clean, use a non abrasive swab (like a Q-TIP), along
with the solvent, to avoid wear to the connector
contact.