MC300 User Manual V2.0
http://www.mictrack.com
5
Bat : Battery Status , 5 is mean 100% power, 1 is mean 20% power .
8.6 Monitor
Command
：
66
Reply : SET OK
Note: Only the authorized phone number send command to the tracker, then tracker will
call the phone number and be the monitor mode .
8.7 Shake Alert
Command
：
181+PTXX
Example: 1810000T05
Reply : SET OK
Close Shake Alarm Command : 180+Password
Example : 1800000
Reply : SET OK
Note: T is the time of shake, the range is
：【
0
，
120
】，
unit is : second
Only send alarm message to the first authorized phone number
8.8 Phone Tracking
Any phone can call the tracker and tracker will hang off the phone automatically,then
send a position message to the sender, if GPS no work, tracker will send a invalid
message to sender , tracker will send a valid position message to the sender again once
GPS work normally by automatically.
8.9 Daily Report
Command: 665+user pHHMM
Example: 66500001022
Reply:SET OK.
Close timing report: 665+user pOFF
Example: 6650000OFF
Reply: SET OFF
Note: HH stands for hour with defined range of [00, 23]. MM stands for minute with
defined range of [00, 59].
8.10 Geo-Fence
8.10.1 Set Geo Fence
Command: 005+user pR
Example: 0050000R1000
Reply: SET OK
8.10.2 Turn On Geo-fence
Command: 211+ password
