Battery and recharge
The neckloop has a built-in 230mah lithium rechargeable battery. The full performance of a new battery is achieved only after
two or three complete charge and discharge cycles. The battery can be charge and discharge hundred of times, but its will
eventually wear out.
When recharge use only the supplied original default USB recharge cable and default wall charger. Do not leave a full charged
device on recharge power source. Overcharging may shorten battery life.
If left unused, a full charged battery will loss its
charge over time.
We supply US/EU/UK standard plugs for the wall charger. Please choose correct plug while placing the order.
PAGE
3
6
TE
3W Inductive Neckloop Magnetic Earbud Kit
126
Troubleshotting
Q. Why microphone not working, or can not hear audio in the earpiece?
A. Firstly check your earpiece, do you hear a hissing noise when the battery is inserted. If so its likely the neckloop has a problem.
If the jack fits your phone but you can not hear any audio, or the microphone failes to work you may need a different jack.
Please contact us in this situation.
Q. Why answer button no works?
A. If the jack fits your phone but your cannot hear any audio, or the microphone failes to work you may need a different jack.
Please contact us in this situation.
Q. How to recharge battery?
A. Please read “Battery and Recharge” step #5 for detailed instructions.. Once connected to power charger successfully, the
indicator will change to red. You should find the indicator on the right side of the neckloop.
Q. Why I heard interference in the earpiece?
A. If earpiece has no quality problem, it is likely the volume is too loud. Use the volume control on the neckloop to adjust the
volume to get clear sounds.
Q. How to avoid earpiece detector with this neckloop?
A. Turn off the power switch to avoid earpiece detection equipment.
To be continued...