17
GB
• Ensure that the switch is not obstructed and the lid is firmly
closed. The kettle will not turn off if the switch is obstructed
or if the lid is open.
• After removing the kettle, there may be some water on the
surface of the stand. This is condensation from the steam
causing the kettle to automatically switch off after boiling.
This is normal and should not be a cause for alarm.
Do not insert any foreign objects or allow any liquid to spill into
the Power Connector Hole.
Cleaning the Kettle
The kettle exterior should be cleaned with a soft damp cloth. Do not use
abrasive cleaners or scouring pads which may damage the finish of the
kettle.
Remember to clean the filter at intervals. Detach the filter by pressing down
the tab of the filter inside the kettle.
Never immerse the kettle or the stand in water and always keep the
electrical contacts and the power connector hole dry. Always disconnect
from the mains before cleaning the stand.
Power Connector Hole
MC17KW18E_IB_181105_grace.indd 17
5/11/18 11:06 am