Microwave Radio Communications SCM4000, Техническое справочное руководство

Страница: 75 / 274

Routine Operation 3-53 SCM4000 Operator’s Guide/Tech Ref Manual
3. Press the Down arrow key, as required, to move the
>> cursor to the System Menu option.
4. Press the SEL key or Right arrow key and observe the
System Menu is displayed. See Figure 3-123 .
Figure 3-123: System Menu - Typical
5. Press the Up or Down arrow keys, as required, to
move the
>> cursor to the Preset Menu option.
6. Press the SEL or Right arrow key to select the Preset
Menu option.
Note
“ X ” indicated in the Preset Menu in the following
steps represents Presets 1 thru 9 . “ Preset #X ”
represents the Preset name.
7. Observe the Preset Menu is displayed. See Figure 3-
124 .
Figure 3-124: Preset Menu - Typical
System Menu
>> Preset Menu
Active Errors
Error Log
Preset Menu
* #X: Preset #X
Save Settings
Recall Preset
8. Press the Up or Down arrow keys, as required, to
move the cursor to the
Recall Preset option. Observe
the cursor changes to a > cursor.
9. Press the SEL or Right arrow key and observe the
Recall Preset option changes to #X: Preset #X , as
shown in Figure 3-125 , and the > cursor changes to a
! cursor.
Figure 3-125: Recall Preset Option
10. Press the Up, Down, Left, or Right arrow keys to select
Preset
1 thru 9 , as required, and press the SEL key.
11. Press the ESC key repeatedly until the Main Screen is
displayed.
12. Press the Up or Down arrow keys, as required, to
move the
>> cursor to the Modulator option.
13. Press the SEL key or Right arrow key and observe the
Modulator menu is displayed. See Figure 3-126 .
Figure 3-126: Modulator Menu - Typical
Note In the following steps, “ Data ChX ” represents Data
Ch1 thru Data Ch4 .
Preset Menu
! #X: Preset #X
Save Settings
Modulator
> SR: 20.0MS/s
Mod Type: 16QAM
Data Ch1: