Routine Operation
3-134
SCM4000
Operator’s Guide/Tech Ref Manual
8.
Press the Up or Down arrow keys, as required, to
move the cursor to the
Recall Preset
option. Observe
the cursor changes to a
>
cursor.
9.
Press the
SEL
key or Right arrow key and observe the
Recall Preset
option changes to
#X:Preset #X
, as
shown in
, and the
>
cursor changes to a
!
cursor.
Figure 3-381: Recall Preset Option
10.
Press the Up, Down, Left, or Right arrow keys to select
Preset
1
thru
9
, as required, and press the
SEL
key.
11.
Press the
ESC
key repeatedly until the Main Screen is
displayed.
12.
Press the Up arrow key to move the
>>
cursor to the
MPEG Encoder
option.
13.
Press the
SEL
key or Right arrow key and observe the
MPEG Encoder
menu is displayed.
.
Figure 3-382: MPEG Encoder Menu
14.
Press the Up or Down arrow keys, as required, to
select the
Net:
option.
Preset Menu
! #X: Preset #X
Save Settings
MPEG Encoder
Mode: Mono
Type: MEG
* Net: Net 1
15.
Observe the cursor changes to a
*
cursor.
16.
Review the Network name for the current Preset.
17.
Press the
ESC
key repeatedly until the Main Screen is
displayed.
To monitor individual Preset Service names, perform the
following steps for each Preset, as required:
1.
Verify the SCM4000 is powered up.
2.
Verify the Main Screen is displayed.
If the Main Screen is not displayed, press the
ESC
key
repeatedly until the Main Screen is displayed.
Figure 3-383: Main Screen Menu
3.
Press the Down arrow key, as required, to move the
>>
cursor to the
System Menu
option.
4.
Press the
SEL
key or Right arrow key and observe the
System
Menu
.
Figure 3-384: System Menu - Typical
SCM4000
>> MPEG Encoder
Modulator
System Menu
System Menu
>> Preset Menu
Active Errors
Error Log
Содержание SCM4000
