Microwave Radio Communications SCM4000, Техническое справочное руководство

Страница: 155 / 274

Routine Operation 3-133 SCM4000 Operator’s Guide/Tech Ref Manual
Note
Changes to Presets are not automatically saved.
Changes to Preset settings will be lost if the Preset
is recalled before Preset setting changes have
been saved.
To save Preset setting changes, go to step 27. To
recall Audio B Preset settings established prior to
performing this procedure without saving the latest
changes, go to step 28.
27. To save Preset setting changes, perform “Save Preset
Settings” on page 3-154 . Procedure is complete.
28. To recall Preset settings without saving the latest
changes, perform
“Recall Preset Settings” on page 3-
155 .
3.9.10 Monitor Network Name
To monitor individual Preset Network names, perform the
following steps for each Preset, as required:
1. Verify the SCM4000 is powered up.
2. Verify the Main Screen is displayed. See Figure 3-378 .
If the Main Screen is not displayed, press the ESC key
repeatedly until the Main Screen is displayed.
Figure 3-378: Main Screen Menu
SCM4000
>> MPEG Encoder
Modulator
System Menu
3. Press the Down arrow key, as required, to move the
>> cursor to the System Menu option.
4. Press the SEL key or Right arrow key and observe the
System Menu is displayed. See Figure 3-379 .
Figure 3-379: System Menu - Typical
5. Press the Up or Down arrow keys, as required, to
move the
>> cursor to the Preset Menu option.
6. Press the SEL key or Right arrow key to select the
Preset Menu option.
Note “ X ” indicated in the Preset Menu in the following
steps represents Presets 1 thru 9 . “ Preset #X ”
represents the Preset name.
7. Observe the Preset Menu is displayed. See Figure 3-
380 .
Figure 3-380: Preset Menu
System Menu
>> Preset Menu
Active Errors
Error Log
Preset Menu
* #X: Preset #X
Save Settings
Recall Preset