manualshive.com logo in svg

Microwave Radio Communications CodeRunner 4, Руководство оператора, Страница: 2 / 60

Поделиться
Скачать
Microwave Radio Communications CodeRunner 4 Скачать руководство пользователя страница 2

PROPRIETARY NOTICE

The information and design contained within this manual was originated by and is the property of 
Microwave Radio Communications (MRC). Microwave Radio Communications reserves all 
patent proprietary design, manufacturing, reproduction use, and sales rights thereto, and to any 
articles disclosed therein, except to the extent rights are expressly granted to others. The 
foregoing does not apply to vendor proprietary parts.

To allow for the introduction of design improvements, specifications are subject to change 
without notice.

©

2007

 Microwave Radio Communications

Printed in the U.S.A.

September 2007

Revision

Date

A

February 2000

B

March 2000

C

July 2000

D

January 2001

E

July 2001

F

July 2002

ECO 2137

G

October 2002

ECO 2195

H

October 2002

ECO 2222

J

September 2007

Microwave Radio Communications
101 Billerica Avenue – Bldg 6
North Billerica, MA   01862-1256
USA

TEL: 

     800.490.5700

              978.671.5700

FAX:  

    978.671.5800

Содержание CodeRunner 4





























































Отзывы:

Нет отзывов