4
2.2) To activate the MicroPLB
TM
with External GPS receiver:
1) Remove cover
Hold away from Face
Antenna will automatically deploy
2) Activate GPS receiver
connect to MicroPLB
TM
use supplied cable.
Beacon will also operate without
GPS receiver if necessary.
(with reduced functionality)
3) Pull activator pin completely out.
Blinking Green = Transmission
Single Blink = GPS NOT Acquired
Double Blink = GPS Acquired
Single Red Blink prior to
each 406 MHz Pulse.
4) Place beacon in a clear area.
antenna pointing up
Use the MicroPLB
TM
only during situations of grave and imminent danger.
Operation under any other circumstances may lead to sanctions and/or penalties.
