Infinity
Poll Worker’s Manual
MicroVote Corporation
10
Lines should be black with no gaps inside of lines. Gaps within the black
areas are an indication of “dead spots” on display. Press the
Cast Vote
button to exit this function.
6.3.
“Show Ballot”
allows the user to view the ballot. The ballot may not be
voted upon in this mode. Press the
Cast Vote
button to exit this function.
6.4.
“Print Zero-Proof”
allows the user to print a zero verification tape to verify
all candidates currently have no votes. (See details in step 7 below)
6.5.
“Start Election”
changes the voting panel to
“Voting Enabled”
mode. (See
details in step 7 below)
6.6.
“Lighten Display / Darken Display”
are used to adjust the default display
contrast. Press the appropriate button repeatedly to adjust. This can be
done on Election Day, between voters, only when no ballot is activated. This
setting can be temporarily adjusted by the voter while voting but will return to
the default setting after each voter.
7. An optional zero-proof may be printed. The election office will decide whether or
not to choose to print this. If you have not been instructed to print the zero-proof,
skip to step 8. To print zero-proof, follow the steps below.
7.1. Press the button next to
Print Zero Proof
on the
“Start Card Function”
screen
PDF created with pdfFactory trial version
