Microvoice Corporation Formula-1, Руководство пользователя

Страница: 54 / 72

H e x e 4 c h a r a c t e r s
If you omit or forget to
input
t h e 4 c h a r a c t e r s , t h e n
automatically bias value turns
into '0000'.
A:TEST.HEX <RETURN>
( a t 4 0 0 0 H )
READ FILE (HEX OR COM)
DATA IS STORED FROM TO 6000
After pressing <RETURN> key, the process starts
a n d c o m p l e t e s t h e f i l e c o n t e n t s b e i n g r e a d a n d g e t
loaded immediately into the assigned memory address.
12. RT:
Return
By command you can return back
to
the
from EP-ROM programmer.
This command works same as pressing ‘C’ key.
T h e f o l l o w i n g e x p l a i n s a n i n p u t f o r m a t o f t h e c o m m a n d .
<RETURN>
<No
Parameter>
For this command parameter is not required.
13.
WM: Write From Memory To EP-ROM
The
command write
the
contents of
the
designated
memory address to
the
EP-ROM.
After finish writing, the
p r o c e s s o f r e a d c o m p a r e - c h e c k a u t o m a t i c a l l y b e i n g
d o n e
by
this command and thereafter consequence (result) appears.
Y o u s h o u l d n o t e t h a t t h e e r a s e - c h e c k h a s n o t b e e n d o n e a t
this time of writing.
If error
occurs in the process of writing, this
command rewrites again automatically.
In order to
stop
writing on the
way, press
'S'
key,
t o
finish writing press k e y , a n d a t t h i s s t a t e t h e
p r o c e s s c o m p a r e - c h e c k d o e s n o t t a k e p l a c e .
In order to
continue
writing press
key.
The writing address
and the related data will always
appear on your CRT at time
of writing.
The input
format of this command are
as follows.
[ EP-ROM Type]
[ S t a r t A d d r e s s ] <RETURN>
: Command name WM
B, C, D or E
4 c h a r a c t e r s
3000
<RETURN>
WRITE 2716
ADDRESS 3000
SET PROM ON THE SOCKET
OK
THEN HIT ANY KEY
If the EP-ROM is set correctly, hit any
key in order
to start this process and you will get following message
on your CRT.
0 0
----- Writing
address data
DATA
IS WRITTEN TO 37FF
O K
or
07FF 00
----- Writing address
data
DATA IS WRITTEN TO 37FF
ERROR
Now if you get above error message on your CRT,
then you
should replace
the
EP-ROM with
the new one
a n d t r y a g a i n f r o m t h e b e g i n n i n g .