Microview MVINVR-08POE4MP-E Скачать руководство пользователя

Страница: 83 / 233

Network Video Recorder User Manual

Rebuild Array

Purpose:

The status of array includes Functional, Degraded and Offline. To ensure the high security and

reliability of the data stored in array, you should take immediate and proper maintenance at arrays

according their status.



Functional: No disk loss in the array.



Offline: The number of lost disks has exceeded the limit.



Degraded: If amount of HDD fail in array, array degrades. You should recover it to Functional by

array rebuilding.

Configure Hot Spare Disk

Purpose:

Hot spare disks are required for disk array automatic rebuilding.

Go to

Storage > RAID Setup > Physical Disk

Physical Disk

Click

of an available HDD to set it as the hot spare disk.

Automatically Rebuild Array

Purpose:

The device can automatically rebuild degraded arrays with the hot spare disks.

Before you start:

Create hot spare disks. For details, refer to Chapter 8.2.1 Configure Hot Spare Disk.

The device will automatically rebuild the degraded arrays with the hot spare disks. Go to

Storage > RAID Setup > Array

to view rebuilding progress.

Array List

Содержание MVINVR-08POE4MP-E










































































































































































































































Результаты поиска

Содержание MVINVR-08POE4MP-E

Отзывы:

Похожие инструкции для MVINVR-08POE4MP-E

Бренды по названию

Популярные бренды

Microview MVINVR-08POE4MP-E, Руководство пользователя

Результаты поиска

Содержание MVINVR-08POE4MP-E

Отзывы:

Похожие инструкции для MVINVR-08POE4MP-E

Бренды по названию

Популярные бренды