Microview MVINVR-08POE4MP-E Скачать руководство пользователя

Страница: 207 / 233

Network Video Recorder User Manual

206

Troubleshooting



No image displayed on the monitor after starting up normally.

Possible Reasons:

−

No VGA or HDMI connections.

−

Connection cable is damaged.

−

Input mode of the monitor is incorrect.

Verify the device is connected with the monitor via HDMI or VGA cable.

If not, please connect the device with the monitor and reboot.

Verify the connection cable is good.

If there is still no image display on the monitor after rebooting, please check if the connection

cable is good, and change a cable to connect again.

Verify Input mode of the monitor is correct.

Please check the input mode of the monitor matches with the output mode of the device (e.g. if

the output mode of device is HDMI output, then the input mode of monitor must be the HDMI

input). And if not, please modify the input mode of monitor.

Check if the fault is solved by the step 1 to step 3.

If it is solved, finish the process.

If not, please contact the engineer from our company to do the further process.



There is an audible warning sound “Di-Di-Di-DiDi” after a new bought device starts up.

Possible Reasons:

−

No HDD is installed in the device.

−

The installed HDD has not been initialized.

−

The installed HDD is not compatible with the device or is broken-down.

Verify at least one HDD is installed in the device.

−

If not, please install the compatible HDD.

Please refer to the

Quick Start Guide

for the HDD installation steps.

−

If you don’t want to install a HDD, go to Menu>System> Event>Normal Event>Exception, and

uncheck the Audible Warning checkbox of “HDD Error”.

Verify the HDD is initialized.

Содержание MVINVR-08POE4MP-E










































































































































































































































Результаты поиска

Содержание MVINVR-08POE4MP-E

Отзывы:

Похожие инструкции для MVINVR-08POE4MP-E

Бренды по названию

Популярные бренды

Microview MVINVR-08POE4MP-E, Руководство пользователя

Результаты поиска

Содержание MVINVR-08POE4MP-E

Отзывы:

Похожие инструкции для MVINVR-08POE4MP-E

Бренды по названию

Популярные бренды