aSERIES DVR04 / DVR08 Digital Video Recorder ·
Quick Operations Guide
Start Auto-switch
.
/
Lock/Unlock
Lock/unlock the toolbar.
If the corresponding camera supports intelligent function, the Reboot Intelligence option is included when
right-clicking mouse on this camera.
Main/Aux Output Switching
When the VGA output is configured as the main output, you can perform the following operation to switch to
CVBS output as the main output.
Steps:
1.
In the live view mode, select the Aux Monitor from the toolbar on the bottom or use the mouse wheel to
double-click on the VGA output screen, and the following message box pops up:
2.
Use the mouse wheel to double-click on the screen again to switch to the Aux output, or click
Cancel
to
cancel the operation.
3.
On the aux output monitor, you can do some basic operation on the live view mode for the Aux output,
including recording, live view, image settings, switch to main monitor, and no operation is allowed for the
main output.
4.
To switch to the main vide output, click the
Main Monitor
icon on the toolbar and click
Yes
on the pop-up
message box.
You can select the Menu Output Mode to Auto, Main
CVBS or VGA under
Menu>Configuration>>General>More Settings.
Record
Move the mouse to the bottom of the screen in live view mode, and select the
or
icon to configure
the normal recording or motion detection recording of all chnanels.
In the pop-up message box, click
Yes
to start the recording of all channels.
12
