MICROTRONIX DX-4400 Series, Руководство пользователя

Страница: 64 / 125

DX-4400
– 3G-SDI Text & Graphics Overlay Inserter – User Manual
Page 64 of 125
The first menu item Text and Graphics Overlay Inserter mode displays the current Mode of Operation of the
DX-4400 unit. The factory default mode is PIP Text Inserter as shown. A new Mode can be selected using a pull-
down menu which lists the available modes as per §
3.2 Modes of Operation .
The next menu section, Overlay Serial Control Port is used to assign the location of the Serial Control Port to
either the RS-232 Control Port or the USB Serial Port. For more information on assigning the Serial Control Port,
refer to §
3.6.1 Serial Control Mode of Operation .
The Apply button is uses to apply the changes and restart the unit (and reload the FPGA firmware) in the new
mode of operation.
Figure 15: General Environment
– Mode of Operation Page
5.3.2 General Environment
– Manage Savesets Page
The General Environment
– Manage Savesets Page
is used for managing the Saveset database which
contains the user configuration data (see section 3.11 Database Saveset Commands for more information on the
use of the Saveset databases). The actions available to the user include:
•
Setting the default values for the current Saveset "defaults" file,
•
Management of user defined Savesets, and
•
Add/create (SC Command), replicate (SR Command) a Saveset database.
The Manage Database and Saveset page (menu) is shown in the following figure.