Microtronics myDatasensMINI H2S 1000, Руководство пользователя, Страница: 36 / 107

9.1.1.1 Display
Important note:
l
Do not touch the display with a sharp object, such as the tip of a pen.
l
Do not stand or place any objects on the display as this could scratch it.
The display of the <1/>myDatasensMINI H2S 1000is only designed to show the current measurement
values (H2S concentration and temperature) and various status information. The device cannot be
operated via the display. The display is activated by tilting the myDatasensMINI H2S 1000 by the
horizontal axis (see "Acceleration sensor" on page 37). The display then remains active for 30sec.
and alternates between the two status indications. A special status indication, that contains the
currently installed firmware version and the battery voltage, is briefly shown directly after the display
is switched on.
Status indication when the display is
switched on Status indication 1 Status indication 2
1 Version number of the currently installed
firmware
6 Temperature in °C (updated in the
measurement cycle, i.e. every 3 sec.)
2 Battery voltage 7 Remaining days until the next service
3 Status (see device status) 8 Remaining days until the next calibration
4 Current date and time (system time) 9 Serial number of the myDatasensMINI H2S
1000
5 H2S concentration in ppm (updated in the
measurement cycle, i.e. every 3 sec.)
36 Rev. 01