Microtronics myDatalogNANOamr, Руководство пользователя, Страница: 91 / 125

Chapter 12 XML interface
12.2.2.5 mydatalognanoamr_state
This table contains the device status at the time of the last transmission.
Note: As, depending on the system, the GSM field strength and battery voltage are measured
more frequently than the recording is completed, the values included in this table do not
always correspond exactly to the last entry in the "mydatalognanoamr_data" table.
gsm_level
GSM field strength [dBm]
voltage
Battery voltage [V]
instrument_state
Error/status code of the device (see "Status LED" on page 46)
sim_id
IMSI of the SIM chip
sim_apn
APN that was used for the last connection
net_mcc
MCC (mobile country code) of the network that was used for the last connection
net_mnc
MNC (mobile network code) of the network that was used for the last connection
imei
IMEI of the modem
sim_icc_id
ICC ID of the SIM chip
12.2.2.6 mydatalognanoamr_aloha
This table includes the ALOHA data that is generated every three seconds independently of the
normal measurement values and is thus not saved with the standard measurement data (see
"ALOHA transmission mode" on page 23).
gsm_level
GSM field strength [dBm]
voltage
Battery voltage [V]
ch1 - ch4
Meter readings
12.2.2.7 mydatalognanoamr_pos
This table includes the position and network information. The interval during which the data is
generated can be set via the "pos_interval" field in the "mydatalognanoamr_user1" table (see
"mydatalognanoamr_user1" on page 89) or via the web interface in the "Basic settings"
configuration section (see "Position cycle" in chapter "Basic setting" on page 53).
Rev. 01 91