Microtronics myDatalogNANOamr, Руководство пользователя, Страница: 53 / 125

Chapter 9 User interfaces
9.2.1.7 Basic setting
Connection type Interval The device registers in the transmission cycle.
Aloha/Wakeup duration Aloha/Wakeup duration connection
Transmission cycle
Time between transmissions
Transmission time Time at which the device establishes a connection to the server regardless
of the transmission cycle. However, this additional transmission is only
completed if a transmission has not already been completed 5 minutes
before this time or if a transmission will not be completed 10 minutes
after this time.
If an additional transmission has been initiated, the internal meter of the
device, that determines the time of the transmission, is reset. This means
that the next transmission is completed exactly after the time specified via
the "transmission cycle" parameter.
Record interval Time between measurement data recordings
Time zone Regional settings (not relevant for raw measurement data as this is stored
in the UTC)
Daylight saving time Configuration for automatic time adjustment
Standard
The configuration for the time adjustment is adopted
by the global server setting (see "myDatanet Server
Manual" 805002).
Off Automatic time adjustment deactivated
USA Predefined setting for the American area
EU Predefined setting for the European area
Position cycle Position update interval
Default report Selection of the report that is loaded by clicking on the device link in the
maps
Off
The default graphic is loaded.
"Name of a
report" The selected report is loaded.
Switch contact mode Operation that is triggered when the solenoid switch is activated, is
currently not modifiable
9.2.1.8 FTP export settings
Note: This configuration section is only visible if the "FTP Agent Extended" licence for the myDataweb-Server has
been enabled.
Rev. 01 53