Microtronics myDatalogGauge 3G, Руководство пользователя

Страница: 115 / 158

11.5.7 Recommended procedure
11.5.7.1 Synchronisation with the myDatanet server
To ensure a more comprehensive management and display of the data, the DeviceConfig configuration
program also provides the option of forwarding the measurement data and configurations to a central
myDatanet server. The next two chapters describe the possible scenarios when reading out the data from
the myDatalogGauge 3G .
More information on the functions of the server is provided in the server manual ("myDatanet Server Manual "
805002).
11.5.7.1.1 Internet connection available when reading out the data
The following process describes how you can not only synchronise the data with the DeviceConfig
configuration program but also with the myDatanet server. A site must already be assigned to the
myDatalogGauge 3G on the myDatanet server for this purpose. Detailed instructions are provided in chapter
"Creating the site" on page 131. Another prerequisite for this is that your PC is connected to the Internet while
reading out the data from the myDatalogGauge 3G . If this is not possible, follow the procedure described in
chapter "No Internet connection when reading out the data" on page 119.
1. Connect the USB BLE-Adapter (300685) to the USB interface of your PC.
2. Start the DeviceConfig configuration program.
DeviceConfig
3. Connect the myDatalogGauge 3G to the PC using the USB BLE-Adapter (300685) supplied (see
"Establishing a connection to a device with Bluetooth Low Energy interface" on page 108).
Rev. 01 115