Microtrol Black Pear TXIO, Инструкция по установке и эксплуатации

Страница: 7 / 12

5
4. Configuration
4.1 S1 Bitswitch Function
S1-1 On = 100 ohm terminator connected across the TCC-Link lines
Off = No terminating resistor.
Note:- Only one terminating resistor should be enabled per network
S1-2 On = Auto Restart (retain the I/O state as it was at power down)
Off = Start in the OFF condition
Fig. 2 LEDs and Config Switches
S1
Bitswitch
S2
Link