MicroTouch M1-156DT-A1, Руководство пользователя

Страница: 25 / 37

25
Mounting
The monitor has an integral 100 mm x 100 mm VESA standard mount pattern that conforms to the
“VESA Flat Display Mounting Interface Standard” which defines a physical mounting interface and
corresponds to the standards for monitor mounting devices.
The monitor may be mounted horizontally (output connectors facing down) or vertically (output
connectors facing right). Ensure that the surface material and the standard wall mount bracket
(purchased separately) are strong enough to support the weight of the monitor (refer to the
Specifications table below for weight information).
To maintain proper ventilation and heat dissipation, keep at least 60mm of clear space from the
mounted display to the mounting surface.
! Warning
Please use the correct screws! The distance between the back cover surface and the bottom of the
screw hole is 5 mm. Please use four M6 diameter screws with 5 mm length to mount the monitor.
! Mise en garde
Veuillez utilizer les vis correcte! La distance entre la surface du capot arrière et le fond du trou de vis
est de 5 mm. Veuillez utilizer quatre vis de diamètre M6 d’une longueur de 5 mm pour mounter le
moniteur.