CT-8750 User’s Guide
P 18
(f)
Prsee S1[UP] or S2[DOWN] to adjust code
(g)
After Setup finished, press S5 [DONE] to save or S6 [QUIT] to exit without
saving the setup
II.1.C.b
Conductance Calibration
Operation Procedure
(a)
Opoeration the same O/S Cal. In the subordinate menu of calibration mode,
using [
↑]
or
[↓]
to select (2)Cond. Cal. Item, LCD display as following
(b)
Press [Enter], LCD display as following
(c)
Press S1[UP] or S2[DONT] to adjust code
(d)
After setup finished, press S5 [DONE]
(e)
If you want to abandon data, press S6[QUIT] to exit this screen