Microtech e-GATE, Инструкция по эксплуатации

Страница: 6 / 16

6
5. Now rotate dial to ‘Direction Change Press PB’.
If you want to change motor direction, press PB , and a green light will appear to show the
direction has been changed. Otherwise rotate dial to ‘Motor Setup’.
direction change direction change
press pb press pb
direction direction
changed changed
6. Rotate to ‘Setup System Press Button’, now press PB and the gate will close until it reaches
end stop.
setup system setup system
press button press button
setting setting
close close
4. Now rotate the dial to display ‘Drive Motor 1 Close’.
You can drive the motor in the close direction by holding down the PB button, or holding
down button 1 on a coded remote.
drive motor 1 drive motor 1
close close
Note: Close stop must be fitted to motor arm for articulated arm style. For linear motor we
use the fully extended internal stop.
system not setup system not setup
12 9 volts 12 9 volts
1. Power up display, it will read ‘System Not Setup’. Now press PB to enter set up menu.
1. e-Gate Single Set Up – Encoder
system type system type
encoder encoder
2. First display is ‘Encoder’. Press PB to select (or rotate dial to select a different program).
drive motor 1 drive motor 1
open open
3. The screen will now display ‘Drive Motor Open’. You can drive the motor in the open
direction by holding down the PB button, or holding down button 1 on a coded remote.