Microtech Axio, Руководство по эксплуатации

Страница: 13 / 19

22 23
T
2
(touch-tone) Function
You may use a cell phone, cordless telephone, or
corded telephone to adjust your hearing system.
The telephone MUST be touch tone and “beep”
when the keys are pressed for this function to work.
If your telephone does not “beep” when the keys
are pressed, consult your telephone operator’s
manual or contact your telephone service provider.
• Hold the phone approximately
3 inches from the ear
• Press ** to “wake” T² (a tone series
indicates that it is ready for a command)
• Press the telephone key that corresponds
to the desired function
• T² will “sleep” after 20 seconds
My hearing instrument has T
2
capability.
Please read the section below.
use the following keypad buttons to
remotely adjust your hearing aid settings.
SYmPTOm POSSIble CAuSeS SOluTIONS
Hearing
instrument not
responding
to telephone
command
Telephone keys not
emitting beep tones
Consult telephone
operator’s manual to
enable beep tones
T² not unlocked prior
to command
Press ** and listen for
unique T² indicator
Telephone too far
from hearing system
Bring telephone closer
to hearing system
microphone
Incorrect key command
Press ** to wake then
press 2 or 8 to increase
or decrease volume or
4 or 6 to change programs
if device has multiple
programs
Hearing
instrument
responded but
won’t respond to
later command
T² automatically
“sleeps” 20 seconds
after last command
Press ** to wake then
press key that corresponds
to desired action
Troubleshooting guide
Volume
Memory
Memory
Press 2 times
to wake Mute
Volume
Operation Operation