MicroStrain V-Link, Быстрый старт

Страница: 3 / 6

connected to the V-Link
®
inputs. The channel plot will continue along the X-axis
until 5000 sweeps (~6 seconds) has elapsed. See Figure 9. This indicates that the
node is successfully streaming its sensor data.
•
Move your mouse pointer within the black area of the Streaming Graph . Right-
click and a pop-up menu will appear.
•
Click Save Stream . A Save As dialog box appears. Accept or modify the File
Name for the CSV file that will be saved. Click Save . The dialog box will
disappear. This indicates that the streaming data was successfully saved to file on
your PC.
•
Right-click on the node and a pop-up menu will appear.
•
Click Configure . The Configuration window will appear.
•
Click the Datalogging tab. Uncheck box for Continuous Datalogging . Uncheck
box for Enable Sensor Event Driven Trigger . Enter the value 1000 into the
Sweeps scroll box. Enter the value 256Hz in the Sample Rate drop-down. Note
that a datalogging session of approximately 3.9 seconds has been set. Click
Apply . Click OK .
•
Right-click on the node and a pop-up menu will appear.
•
Click Datalogging . Click Erase. A confirming message box will appear. Click
Yes . A progress bar will appear and disappear. This indicates that the
datalogging memory of the node was successfully erased.
•
Right-click on the node and a pop-up menu will appear.
•
Click Datalogging . Click Trigger Session. A progress bar will appear and
disappear. This indicates that a datalogging session was successfully triggered.
•
Right-click on the node and a pop-up menu will appear.
•
Click Datalogging . Click Download. A progress bar will appear and disappear.
This indicates that all datalogging sessions were successfully downloaded.
•
Right-click on the node and a pop-up menu will appear.
•
Click Datalogging . Click Browse Triggers. The Trigger Browser window will
appear.
•
Click the + sign to the left of the trigger label (example: July 20, 2009 09:36:07)
and Trigger 1 will appear. Highlight Trigger 1 and click Open Trigger . The
data in Trigger 1 will be displayed in spreadsheet format (assuming you have
Microsoft® Excel installed). This indicates that the data from Trigger 1 was
successfully saved to file on your PC.
•
Close the spreadsheet. Click OK on Trigger Browser window.
Congratulations!
You are off and running! Please read the V-Link
®
user manual and the Node
Commander
®
software manual to learn how to successfully put your wireless data
acquisition system to work.
Further Support
MicroStrain Support Engineers are always available by phone, email or SKYPE to
support you in any way we can.
Figures
3