Application manual:
In order to establish a remote connection, both the personal computer and the
Hololens device must use the signaling server's help.
To configure the server address in the desktop application, click
service
icon
(cogwheel symbol) in the left panel and enter the address
rtc1732.cloudapp.net
in
IP
field in the section
Connection
:
Other settings can be left unchanged - unless there is a need to select other than
default media device (camera / microphone).
If the server address has been set correctly, then after clicking the
Connect
button a
connection should be made (in case of failure, an error message will be displayed).
In the case of the Hololens application, the connection procedure looks similar - after
running the application enter the same server address in the text field and click the
button
Connect
.