5
DIP-switch
The DIP-switch is used to configure operation mode for
LLF
(
Link Loss
Forwarding)/LFP
(
Link Fault Pass-Through
) and operation mode for
Fiber ports. The default value of Dip-switch is
OFF
.
S/W No
Status
Description
1
ON
1000 SFP Force mode
OFF
1000 SFP Auto-Negotiation mode
2
ON
LLF Enable
OFF
LLF Disable
3
ON
1000 SFP Force mode
OFF
1000 SFP Auto-Negotiation mode
Link Loss Forwarding:
With LLF enabled, the system allows the link failure of one side to be
reported to the other side.
[Note]
Please don’t change the DIP-switch setting when fiber port is
transmitting or receiving data. It may cause some data error. After
changing the DIP-switch setting, please power off and on the converter to
have the configuration taken effective.
Rear Panel
The rear panel contains a power socket. This power socket accepts DC9V
voltage and minimum 0.7A supplied current.
DC IN
