Microsens 10/100Base-TX to 100Base-FX, Руководство пользователя

Страница: 13 / 13

9
9. Cable Connection Parameter
100Base-X network allows 512-bit time delay between any two node-stations in a
collision domain. Switch-based Media Converter breaks up TP and Fiber segments’
collision domain to extend the cabling distance.

TP Cable Limitations: Cat. 5 and up to 100m

Converter Fiber Cable Limitations:
SC/ST Converter Models
Multi-mode Half-duplex 412m
Multi-mode Full-duplex 2Km
Single-mode Half-duplex 412m
Single-mode Full-duplex 15Km
10. TP-Fiber Technical Specifications
•
Standards
: IEEE802.3u 10/100Base-TX, 100Base-FX
•
UTP Cable
: Cat. 5 cable and up to100m
Fiber Cable :
50/125, 62.5/125 or 100/140
µ
m multi-mode
8.3/125, 8.7/125, 9/125 or 10/125
µ
m single-mode
•
LED Indicators :
POWER, TP LNK/ACT, 100, FX LNK/ACT, FDX/COL
•
Data Transfer Rate :
Speed Forwarding Rate
100Mbps 148,800 PPS
10Mbps 14,880 PPS
•
Flow Control: IEEE802.3x compliant for full-duplex
Backpressure flow control for half-duplex
•
Power Requirement : 1A@
+
5VDC above AC-DC Adapter
0
°
to 50
°
C (Commercial)
: 1A@
+
5VDC above AC-DC Adapter
0
°
to 60
°
C (Industrial)
•
Ambient Temperature : 0
°
to 50
°
C (Commercial)
: 0
°
to 60
°
C (Industrial)
•
Humidity : 5% to 90%
•
Dimensions : 26.2(H)
×
70.3(W)
×
94(D) mm
•
CE Mark
Note: For connecting this device to Router, Bridge or
Switch, please refer to the corresponding device's
Technical Manual.