2. After the installation completes, install the smartpqi driver rpm by using the following command (where
#.#.#-### is the build number):
rpm –ivh kmod-smartpqi-#.#.#-###.rhel7u3.x86_64.rpm
2.6.2.2
Red Hat Enterprise Linux 7 Installation Update 2
To install the RHEL7 driver with a Linux system:
1. Power-on the system.
2. Insert the RHEL7 DVD image from a media source.
3. Boot the RHEL installation.
4. Type "e" to edit the grub entry and append "modprobe.blacklist=aacraid inst.dd".
5. Insert the USB driver disk, then type CTRL+X to boot.
Note: If the installer does not display the driver update media, type "r" and press
Enter to refresh the list.
6. Select the device labeled "OEMDRV": The installer presents a smartpqi driver rpm to install.
7. Type "1" on your keyboard and press Enter to select the driver update.
8. Type "c" and press Enter to continue.
Note: Remove the USB driver disk once the driver update has been extracted.
2.7
Step 7: Install maxView Storage Manager
Before installing maxView Storage Manager, ensure that you are logged in with administrator or root
privileges. Any customization files you created using a previous version of the application are saved and
used in the upgrade.
Note: When you install maxView Storage Manager, the ARCCONF Command Line Utility
is also installed.
2.7.1
Windows Installation
1. In Windows Explorer or My Computer, change to the directory where the Windows setup program is
located.
2. Double-click the setup program for your operating system version:
setup_asm_x64.exe (64-bit)
3. Follow the on-screen instructions to continue the installation. When prompted for configuration details,
enter the following:
• Web Server Port: 8443
• Redfish Server Port: 8081
• Standalone Mode: No (unchecked)
4. Complete the installation, following the on-screen instructions.
5
Microsemi Proprietary and Confidential Quick Start Guide Revision 1
Quick Setup
