Universal Serial Bus OTG Controller
UG0331 User Guide Revision 15.0
344
10.3.10.2 Endpoint1 Control and Status Registers
10.3.10.3 Endpoint2 Control and Status Registers
Table 272 •
Endpoint1 Control and Status Registers
Register Name
Address
Offset from
0x40043000
Width
R/W
Type
Reset
Value Description
EP1_TX_MAX_P_REG
0x0110
16
R
0
Maximum packet size for host transmit
endpoint1.
EP1_TX_CSR_REG
0x0112
16
R
0
Provides control and status bits for transmit
endpoint1.
EP1_RX_MAX_P_REG
0x0114
16
RW
0
Defines the maximum amount of data that can be
transferred through receive endpoint1 in a single
operation.
EP1_RX_CSR_REG
0x0116
16
R
0
Provides control and status bits for transfers
through the receive endpoint1.
EP1_RX_COUNT_REG
0x0118
16
R
0
Holds the number of data bytes in the packet
currently in line to be read from the endpoint1
receive FIFO. If the packet is transmitted as
multiple bulk packets, the number given will be
for the combined packet.
EP1_TX_TYPE_REG
0x011A
8
W
0
Reads the number of bytes to be read from
peripheral endpoint1 transmit FIFO
EP1_TX_INTERVAL_REG 0x011B
8
RW
0
Sets the polling interval for interrupt/ISOC
transactions or the NAK response timeout on
bulk transactions for host transmit endpoint1.
EP1_RX_TYPE_REG
0x011C
8
RW
0
Sets the transaction protocol, speed, and
peripheral endpoint number for the host receive
endpoint1.
EP1_RX_INTERVAL_REG 0x011D
8
RW
0
Sets the polling interval for interrupt/ISOC
transactions or the NAK response timeout on
bulk transactions for host receive endpoint1.
EP1_FIFO_SIZE_REG
0x011E
8
R
Returns the configured size of the endpoint1
receive FIFO and transmit FIFOs.
Table 273 •
Endpoint2 Control and Status Registers
Register Name
Address
Offset from
0x40043000
Width
R/W
Type
Reset
Value Description
EP2_TX_MAX_P_REG
0x0120
16
RW
0
Maximum packet size for host transmit
endpoint2.
EP2_TX_CSR_REG
0x0122
16
R
0
Provides control and status bits for transmit
endpoint2.
EP2_RX_MAX_P_REG
0x0124
16
RW
0
Defines the maximum amount of data that can be
transferred through receive endpoint2 in a single
operation.
Содержание SmartFusion2 MSS
