PD-IM-7401 Evaluation Board - User Guide
Copyright © 2009
Microsemi
Page
9
Rev. 1.0, 8-Apr-10
Analog Mixed Signal Group
2381 Morse Avenue, Irvine, CA 92614, USA; Phone (USA): (800) 713-4113, (ROW): (949) 221-7100 Fax: (949) 756-0308
Figure 5: Configuration Switches (SW #2)
3.4 Connectors
The following sections provide both general and detailed information regarding the unit connectors.
3.4.1 Connectors
Table
Table 5 lists the Evaluation Board's connectors.
Table 5: Connectors List
#
Connector
Name
Description
1
CON1 – CON2
RJ45 connectors
Two RJ45 ports for data-in and for connecting to the
powered device load
2 J3
Interface
configuration
connector
Connection to the configuration board
3
J2
Vin connectors
DC in (Vmain) connection used to power the
Evaluation Board.
3.4.2 Connectors Detailed Explanation
The numbering is in reference to the numbers listed in Table 5.
1. RJ45 connectors (#1)
See Figure 6. There are two dedicated RJ45 connectors.
Table 6: RJ45 Connectors
CON2 Pin No
Signal Name
Description
1, 2, 3, 4, 5, 6, 7, 8
Data in
Data input from external switch (1G)
CON1 Pin No
Signal Name
Description
1, 2
Data and power out
Data and power output to powered device (PoE Master
Negative data port)
3, 6
Data and power out
Data and power output to powered device (PoE Master
Positive data port)
4, 5
Data and power out
Data and power output to powered device (PoE Slave
Negative spare port)
7, 8
Data and power out
Data and power output to powered device (PoE Slave
Positive spear port)
Manufacturer:
Kinsun
