Power Over Ethernet Power View Pro User Guide
Copyright
2013
Microsemi
36
Rev.1.0, 17-Dec-13
Analog Mixed Signal Group
1 Enterprise, Aliso Viejo, CA 92656, USA; Phone (USA): (800) 713-4113, (ROW): (949) 221-7100 Fax: (949) 756-0308
7 Upload/Download Unit Configuration over TFTP
7.1 Upload Unit Configuration
Use the following procedure to upload the unit configuration:
1. Activate and run IPv4 or IPv6 TFTP Server (the TFTP Server provided inside the CD supports only
IPv4).
2. Verify that the firewall on the computer running TFTP Server is Off, or accepts incoming UDP traffic on
port 69.
Figure 7-1: NBTFTP Server
3. Set TFTP Server root files folder (for example d:\config_files).
4. Enable TFTP Server to write incoming files to its local drive (see Figure 7-1).
5. Open a Telnet session with the unit. Type username and password, and select the configuration menu.
Figure 7-2: Upload Unit Configuration
6. Type the TFTP Server IPv4/IPv6 address, file name (for example param.txt), and press Enter to upload
the unit configuration file to TFTP Server root folder.
