50200200-1/2.13
FlashPro Lite Device Programmer Quickstart Card
Common Issues
If you see two blinking LEDs on the programmer after you have connected the programmer to the
parallel port, make sure the parallel port cable is connected firmly to the PC parallel port. For more
information, refer to the
FlashPro Software and Hardware Installation Guide
and the “Known
Issues and Workarounds” section of the FlashPro software release notes:
www.microsemi.com/soc/download/program_debug/flashpro.
Documentation Resources
For further FlashPro software and FlashPro Lite device programmer information, including user's
guide, installation guide, tutorial, and application notes, refer to the FlashPro software page:
www.microsemi.com/soc/products/hardware/program_debug/flashpro
Technical Support and Contacts
Technical support is available online at
and by email at
Microsemi SoC Sales offices, including Representatives and Distributors, are located worldwide. To
find your local representative visit
