6-4
MS-1 Scan Engine
User Manual
MS-1 Read Cycle Overview
MS-1 Read Cycle Overview
The MS-1 outputs symbol data as soon as it is decoded. There is no “End of Read Cycle”
option.
Multiple
symbol operations are emulated by controlling the read cycle duration
and the time allowed between identical consecutive decodes.
The following conditions also apply:
1. In
Single
symbol mode, a read cycle ends only on a decode, falling trigger, or timeout.
2. In
Multiple
symbol mode, the read cycle begins on a triggered event, but starts over
after any symbol has been decoded.
3. There is no “new trigger” feature.
4. There is no timeout for
External Level
mode.
5. There is no
Continuous Read 1 Output
setting in
Trigger Mode
, but this setting can
be emulated by following the steps described in
Continuous Read 1 Output Emulation
.