Microscan HS-51 Скачать руководство пользователя страница 47

Страница: 47 / 156

HS-51/HS-51X Wireless Handheld Reader User Manual

4-7

Communications

Configuring and Using Batch Mode

Follow the procedure below to set up and use Batch Mode.
• Plug in the Charging Station with Embedded Modem.
• Move the switch on the Charging Station with Embedded Modem to the left (opposite the

direction of the arrow on the switch).

• Decode the

Default Reader Settings

symbol.

• Decode the

Clear All Stored Data, Images, and JavaScripts

symbol.

• Decode the

Batch Mode Enabled – Log Only

symbol.

• Decode the

USB Keyboard Mode

symbol.

• Use the reader to capture symbol data and log it to the reader as needed. The Storage

Icon on top of the reader will illuminate as symbols are decoded and logged.

• Place the reader in the Charging Station with Embedded Modem’s dock to transfer

logged data to the PC. A Microsoft Keyboard driver will load and data will then be sent to

the PC after approximately 10 seconds.

Default Reader Settings

Clear All Stored Data, Images, and JavaScripts

Batch Mode Enabled – Log Only

USB Keyboard Mode

Содержание HS-51





























































































































































Результаты поиска

Содержание HS-51

Отзывы:

Похожие инструкции для HS-51

Бренды по названию

Популярные бренды

Microscan HS-51, Руководство пользователя

Результаты поиска

Содержание HS-51

Отзывы:

Похожие инструкции для HS-51

Бренды по названию

Популярные бренды