Microscan HawkEye 45T, Руководство пользователя

Страница: 35 / 102

Bluetooth Radio Operation
Ge
tting
S
tar
ted
1
Rev 2.0.0, Jan 2009 HawkEye™ 45T User Manual
1-25
Note: While installing the Bluetooth Configuration Manager software that was
included with your Bluetooth adapter, make sure to note the Virtual COM Port
number the software assigned for the adapter (e.g. COM 10). This is the COM
Port your HE45T will connect through.
To connect your reader, scan the Reset to Factory Defaults in Figure 1–28. Then,
the QuickConnect Code and your HE45T will automatically connect. You should
also scan the Save Settings code if you want to save these settings.
Note: If the HE45T powers off without scanning the Save Settings code, you will
lose your settings.
FIGURE 1–28.
Reset to RF Factory Defaults Code
Radio Range and Transferring Data
The HE45T radio is a Class 1 device. If connected to another Class 1 device, the
reader has roughly a 300 foot line of sight operating range. If connecting to a
Class 2 or Class 3 device, the operating range may drop to match the lower range.
Once a reader is connected, the application software on the host must be open to
receive data.
When the HE45T detects the radio is out of range, the HE45T will store data on
the reader’s non-volatile memory. The reader will continue to try and send data
until radio is back in range. Once the data is sent, the data will be erased from the
reader’s memory. If the radio cannot connect in 90 seconds, it will give an error
beep. The reader will continue to try and connect until it has reached the
programmable radio timeout setting.
Reset to RF
Factory Defaults Save Settings Quick Connect