Camera Image Window
Step 4: Adjusting the Camera Image
Camera Lens Close-up View
4.1 While viewing the camera image in the MiniHub camera image window, adjustments can
be made to the camera’s focal length, iris or focus.
4.2.
Open the camera housing using the safety latch at the rear of the unit. The camera
imager is located just behind the housing window.
4.2.1.
To adjust focal length, turn the focal length locking knob counter-clockwise to
unlock. Rotate the focal length adjustment ring at the rear of the lens to set. Turn
the focal length locking knob clockwise to lock back into place.
4.2.2.
To adjust iris, turn the iris locking knob counter-clockwise to unlock. Slide the
iris locking knob to the right or left to set. Turn the iris locking knob clockwise to
lock back into place.
4.2.3.
To focus, turn the focus locking knob counter-clockwise to unlock. Rotate the
focus adjustment ring at the front of the lens to set. Turn focus locking knob
clockwise to lock in place.
4.3.
After the imager adjustments have been completed, close the camera housing and
lock the latch into place.
4.4.
After this step, setup is complete and the Rugged-i camera is ready for use.
Installation Guide v1.1
©2011 MicroPower Technologies, Inc.
4
