Glue in place just the
WingTip Main Spar
and allow
to dry.
Make sure that on the under side of the wing the
WingTip Main Spar
is flush with the bottom of the
Wing Spar Joiners.
Next, glue the
WingTip Leading Edge Spar
and
the
WingTip Trailing Edge Spar
to the main wing.
You may need to pin the wing frame to a surface to
keep it in place.
Masking tape can also be used to pull the two parts
together for gluing.
Once the wing tips are securely glued to the main
wing, you can glue in place the
WingsTip Cornice
pieces
On this piece you will first need to trim the cornice to
make it a bit less than 90 degrees.
Next glue in place the
Wings Root Cornice
as
shown. You may need to pin them to hold the curve
till they dry.
Glue in place the
Wings Root Boxing
. You will need
to sand the edges of these pieces a little to get them
to slide in neatly.
Leave a gap here.
