Your kit contains the following items
Pre- cut parts
Carbon rod
Ballast weight
Sandpaper sheets
Covering sheets
Control line linkage parts
Plan sheet
The Soarer is a high quality kit for the intermediate
to advanced builder. It features a tow line hook
which allows you to launch the glider with a tow
line and then after the tow line detaches, have the
rudder automatically deflect to put the glider into
a circular flight path as it glides back down.
It not only features a built up wing airframe but
also a built up tailplane with an airfoil section.
Carbon bracing is used extensively to give
exceptional strength while retaining its light
weight.
Whether set up for hand launching or using a tow
line, the Soarer will give exceptional gliding
performance. Setting this glider up for towline
operation will require a degree of skill and testing.
Note: The glider specification “P1A-1” is a
manufacturer’s specification only and does not
denote the glider as being officially approved for
any particular gliding competition specification.
Additional Items You May Need
* Epoxy Glue
* Wood Glue
* Masking Tape
* Sanding Block
* Cling Wrap
* Hobby Knife
* Pins
* BlueTack
* Nail File
