MPA-
20
Micro Precision Actuator
Rev: 1.01
6
Reference Manual
MICRONIX USA,LLC
Irvine, California
www.micronixsusa.com
4.
Installing the MPA-20
4.1
MPA-20 12 mm Installation
The MPA-20 can be installed to motorize manual drives, mirror mounts or other
applications. While installing, support the MPA-20 by holding the motor/gear
reduction unit to avoid applying torque to the housing. In place of the spherical
actuator tip, a 4-40 thread may be used for pulling applications. When preparing
the stage for vacuum environments, take the necessary precautions (such as
wearing gloves, clean room and clothing, etc.) when handling the stage as to
avoid any contaminants.
Requires:
1x MPA-20 Linear Actuator
1x Locking Nut
1x 17mm Hex Wrench (not supplied)
1.
Unscrew Locking
Nut from MPA-20
2.
Insert MPA-20 into
Mounting Surface
Customer Supplied
Mounting Surface
3.
Tighten Locking Nut
using 17mm wrench
Locking Nut
