6 |
P a g e
Rev 3.01
1.
Port Control – The picture below depicts the program when the Port has been
opened
a.
Select the COM port associated with your MMC-100
as discussed
in section 2.1, step 5.
b.
Click the Open Port button to connect to the MMC-100
i.
This button should change giving you the option to close the port
c.
The Port field should change to indicate the Port is Open.
You will
see the progress bar fill and the adjacent field change with information
regarding the query process as the program initializes. You are now ready to
start moving a stage with your MMC-100. For more information about this
program see the MMC-100 MCP program guide.
d.
The Axis selector will allow you to switch control between
different axes
2.
Commands
