M6Me System Board Manual
Chapter 6: Installing Device Drivers
58
Windows NT
1. Boot Windows NT in VGA mode.
2. From the Main group, double-click on Control Panel,
then double-click on Display.
3. Select Change Display Type.
4. From the Change Display Type screen, select Change
for the adapter type.
5. Select the Other button.
6. Insert the
M6Me Drivers and Utilities disk
into your
floppy drive. Click on OK.
7. Click on the Install button.
8. Click on Yes to install the driver.
9. When the Windows NT Setup dialog box appears,
select drive A:\, then click on Continue.
10. When a message appears stating that the drivers
were successfully installed, click on OK.
11. Restart your computer for the changes to take effect.
Installing the SCSI Drivers
Refer to the "Adaptec 7800 Family Manager Set User's
Guide" for driver and configuration information for your
operating system.
