M6DPi System Board Manual
Chapter 4: The BIOS Setup Utility
39
LBA Transfer Mode
Enabling this selection causes LBA (Logical Block Ad-
dressing) to be used in place of Cylinders, Heads and
Sectors. The default setting is Enabled.
32-Bit I/O
This category allows you to enable the 32-bit I/O function
of the PCI IDE controller. Select Disabled if your drive
will not run at this speed. The default setting is Disabled.
Transfer Mode
This category sets the transfer speeds for IDE devices.
The Standard option is the default setting. The Fast PIO
1, Fast PIO 2, Fast PIO 3 and Fast PIO 4 options are for
higher speed devices.
Smart Monitoring
This feature will monitor your hard drive and report any
problems detected. This option is automatically detected
based on the hard drive's ability to support it. This setting
cannot be changed.
Содержание M6DPi Pentium Pro
Страница 14: ...M6DPi System Board Manual M6DPi System Board Chapter 2 Configuring the M6DPi 12 Figure 2 1 M6DPi System Board...
Страница 34: ...M6DPi System Board Manual 32 Chapter 3 Installing the M6DPi...
Страница 52: ...M6DPi System Board Manual Chapter 4 The BIOS Setup Utility 50...
Страница 70: ...M6DPi System Board Manual Appendix E Updating the System BIOS 68...