The BIOS Setup Utility
4-7
Boot Sequence
This category selects the order the system searches for a boot disk and may be
set for:
A: then C:
C: then A:
C: only
SETUP Prompt
When enabled, this category allows the system to display the “Press <F2> to
enter SETUP” message during boot.
Post Errors
When enabled, this category allows the system to display the “Press <F1> to
resume, <F2> to SETUP” and pause if errors occur during boot. If disabled,
the system ignores any errors and always attempts to boot.
Floppy Check
When enabled, this category verifies the floppy drive is installed on boot. For
faster booting, select DISABLED.
Numlock
Setting this to Enabled activates Numlock upon boot. Setting this to Auto
activates Numlock if the BIOS detects a numeric keyboard. It may also be
disabled.
Cache
This category allows you to enable the external cache. For optimal perfor-
mance, select Enabled.
System Memory
The System Memory category identifies the size of the base memory. It
cannot be changed.
Extended Memory
The Extended Memory category automatically detects the amount of memory
installed above the amount in the System Memory category. Because the
BIOS automatically calculates the amount of memory installed in your
system, you cannot change this category without adding or removing memory.
