4
3
1
2
Tube-End Mounting
Components:
Staple, Hexangular Screw, Spring Washer, Fix
Mount and Antenna.
Step 1.
Determine the position to set the antenna.
Step 2.
Set the staple through the fix mount from the opposite side
(Picture 1).
Step 3.
Set the hexangular screw and spring washer with the
staple and fix mount (Picture 2).
Components:
Step 2.
Step 3.
Wall Mount
Components:
Peg, Setscrew, Fix Mount and Antenna.
Step 1.
Determine the position to set the antenna.
Step 2.
Drill holes to set fix mount with antenna by peg (Picture 1).
Step 3.
Set setscrew for the fix mount with antenna on the even
surface (Picture 2).
Step 3.
Installation
Before you start installing the antenna, please verify the following
items are in the package.
x 4
x 4
x 4
x 4
x 2
x 1
x 1
Introduction
Thank you for purchasing Micronet SP920MA-12 Omni-Directional
antenna. This quick installation guide is aimed at easy installation
procedures of this device. Before installation, please read the
following procedures carefully. Micronet SP920MA-12 is directional
antenna for data transmission that used to link two wireless
networks at 2.4 GHz ISM band (Industrial, Scientific and Medical).
SP920MA-12 is designed for outdoor use to extend wireless
connection coverage. It produces a gain of 12dBi and can be used
to extend the distance of Wireless LAN.
Package Contents
Please verify the following items are in the package:
1 x SP920MA-12 Omni-Directional Antenna
1 x Quick Installation Guide
1 x Mounting Kit
1 x Antenna Cable
Note
: Contact your dealer immediately if any of the above items
are missing, damaged, or if the unit does not work.
Picture 1.
Picture 2.
Picture 3.
Staple
Spring
washer
Hexangular
screw
Picture 1.
Picture 2.
Picture 3.
Peg
Setscrew
