manualshive.com logo in svg

MicroNet SP916GN, Руководство пользователя

Поделиться
Скачать
MicroNet SP916GN Скачать руководство пользователя страница 24

 

 

Parameter 

Description 

Obtain an IP address 
Automatically 

The ISP requires user to obtain an IP address by DHCP before 
connecting to the PPTP server. 

Use the following IP 
address 

The ISP gives user a static IP to be used to connect to the PPTP 
server. 

IP Address 

This is the IP address that the ISP has given to user to establish 
a PPTP connection. 

Subnet Mask 

Enter the Subnet Mask provided by the ISP (e.g. 255.255.255.0).

Default Gateway 

Enter the IP address of the ISP Gateway 

User ID 

Enter the Username provided by the ISP for the PPTP 
connection. Sometimes called a Connection ID.  

Password 

Enter the Password provided by the ISP for the PPTP 
connection.  

PPTP Gateway 

If the LAN has a PPTP gateway, then enter that PPTP gateway 
IP address here. If users do not have a PPTP gateway then 
enter the ISP’s Gateway IP address above.  

Connection ID 

This is the ID given by ISP. This is optional. 

MTU 

This is optional. Users can specify the maximum size of the 
transmission packet to the Internet. Leave it blank if users do not 
wish to set a maximum packet size. 

BEZEQ-ISRAEL 

Select this item if users are using the service provided by 
BEZEQ in Israel. 

Connection Type 

z

 

If you select “Continuous”, the router will always connect to 
the ISP. If the WAN line breaks down and links again, the 
routers will auto-reconnect to the ISP.  

z

 

If users select “Connect on Demand”, the router will auto-
connect to the ISP when someone wants to use the Internet 
and keep connected until the WAN idle timeout. The router 
will close the WAN connection if the idle time period exceeds 
the “Idle Time”. 

z

 

If users select “Manual”, the router will connect to ISP only 
when click “Connect” manually from the Web user interface. 
The WAN connection will not disconnect due to the idle 
timeout. If the WAN line breaks down and links again, the 
router will not auto-connect to the ISP. 

Idle Time 

z

 

Users can specify an idle time threshold (minutes) for the 
WAN port. This means if no packets have been sent during 
the specified period, the router will automatically disconnect 
the connection with the ISP. 

z

 

This “idle timeout” function may not work due to abnormal 
activities of some network application software, computer 
virus or hacker attacks from the Internet. 

Click <OK> to complete the Quick Setup Wizard and start using the broadband 

router. 

 

 

 

21

Содержание SP916GN














































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды