(Note: When doing dynamic bridging, configure Bridge 1 to be in AP Client
mode and configure Bridge 2 to be in AP/Bridge mode.)
2.7
Setting up Client Computers
The TCP/IP and IEEE 802.11b-related settings of wireless client computers
must match those of the AP.
2.7.1 Configuring SP915A Related Settings
Before the TCP/IP networking system of a wireless client computer can
communicate with other hosts, the underlying wireless link must be
established between this wireless computer and an AP.
To establish wireless link to the AP:
y
Launch the configuration/monitoring utility provided by the vendor of
the installed WLAN NIC.
y
Use the utility to make appropriate Operating Mode, SSID and WEP
settings.
12
